Turned About!
Time to start on the offside. Deciding I would prefer to work in sunlight, I moved the DMS out of the way and turned the Regal round! A 5-point turn did the job!
I also managed to free the accelerator pedal sufficiently to cure the reluctance to decelerate.
My plan is to prepare 2 bays at a time for welding. I will first ask Bob to weld pillar 2 (2nd from right here) and then move outwards to pillar 1 (to the right) and pillar 3 (to the left). I also plan to use the old wooden planks as spacers to make sure the same distances are maintained, and I will use Acrow props before I losen a single pillar.
This document
maintained by JohnB@crownsys.co.uk.
Material Copyright © 2006 John Braga